In this section
- NEW HITCHMASTER® DO35 V3-I Coupling
- HITCHMASTER® DO35 V2-I
- NEW HITCHMASTER® DO35 V3-R Coupling
- HITCHMASTER® DO35 V2-R
- DO35 V2 Adaptor Kit - WDH2
- DO35 V2 Adaptor Kit - WDH3
- DO35 V2/V3 Adaptor Pin - TP-WX - Shank 1 1/4"
- DO35/DO45 UNIVERSAL C Spanner
- DO35 V2 Dust Cap c/w Lanyard
- DO35 Pin Cover
- DO35 V2/V3 Tow Pin - Shank 7/8"
- HITCHMASTER® DO45
- DO45 Dust Cap c/w Lanyard
- DO45 Pin Cover
- DO45 Tow Pin - Shank 1 1/4"
- HITCHMASTER® DO65
- DO65 Pintle Hook Adaptor
- HITCHMASTER® BI-LOCK
- VC Handbrake
- VC Handbrake - Cable Kit
- DO35 V3 HANDBRAKE
Axles, Hubs, Brakes & Bearings
Axles & Stubs
Axles and Stubs are custom products that cannot be purchased online. To get a quote please complete the order form and we will provide you with a quote quick
An Axle Beam has no Brakes or Hubs fitted. Certain sized Axle Beams can be fitted with Weld Rings or Caliper Mounts for the fitment of brakes at a later stage. The Axle Beam can also be fitted with the Axle Seats for the Springs. When ordering an Axle Beam we would need to know the Tip to Tip length of the axle. This is the overall length of the axle from the end of one threaded end to the other. If Axle Seats are to be fitted we would need to know the Centre to Centre measurement for the positioning of the Axle Seats. An Axle Beam comes complete with Axle Nuts and Washers.
NO BRAKED AXLES
A No Braked Axle comes fitted with Wheel Hubs at each end. The size of the Hub is dependent on the size of the axle steel used, the stud pattern required and the bearing set used. No Braked Axles can also be fitted with Weld Rings or Caliper Mounts for fitment of brakes at a later stage. A No Braked Axle can also be fitted with the Axle Seats for the Springs.
When ordering a No Braked Axle we would need to know one of two measurements.
- The Tip to Tip length of the axle. This is the overall length of the axle from the end of one threaded end to the other.
- The Face to Face measurement.
This is the distance between the Left Hand and Right Hand mounting face that the wheel bolts to. This is the preferred measurement as it ensures that the wheels will remain in the same position. If Axle Seats are to be fitted we would need to know the Centre to Centre measurement for the positioning of the Axle Seats. We would also need to know the Stud Pattern that is to be used for the wheel hubs.
Click to view the Axle Beam Load ratings, sizes, part numbers (PDF, 64KB)
Order Form - Axle (1005 KB)
Please complete the form below. Items marked with an * are required.