In this section
- NEW HITCHMASTER® DO35 V3-I Coupling
- HITCHMASTER® DO35 V2-I
- NEW HITCHMASTER® DO35 V3-R Coupling
- HITCHMASTER® DO35 V2-R
- DO35 V2 Adaptor Kit - WDH2
- DO35 V2 Adaptor Kit - WDH3
- DO35 V2/V3 Adaptor Pin - TP-WX - Shank 1 1/4"
- DO35/DO45 UNIVERSAL C Spanner
- DO35 V2 Dust Cap c/w Lanyard
- DO35 Pin Cover
- DO35 V2/V3 Tow Pin - Shank 7/8"
- HITCHMASTER® DO45
- DO45 Dust Cap c/w Lanyard
- DO45 Pin Cover
- DO45 Tow Pin - Shank 1 1/4"
- HITCHMASTER® DO65
- DO65 Pintle Hook Adaptor
- HITCHMASTER® BI-LOCK
- VC Handbrake
- VC Handbrake - Cable Kit
- DO35 V3 HANDBRAKE
SUperior damping systems
The SHOCKMASTER® range of damping systems is the culmination of many years of development and testing to produce dampers specifically designed for our range of CRUISEMASTER® independent suspensions.
During our in-house testing we found that specific features were required to allow dampers to withstand harsh Australian conditions.
This resulted in our engineers specifying features such as secondary arc welds, viton seals and multiple bore sizes (depending on application). Furthermore, our SHOCKMASTER® range features damping specifically matched to our CRUISEMASTER® independent suspension systems and the loads imposed on them by various vehicle weights.
The SHOCKMASTER® range now spreads four different models from a 30mm dual tube (used in CRUISEMASTER® CRS) all the way up to a 46mm monotube with piggyback reservoir (used in CRUISEMASTER® ATX). Each model has been through our extensive Remote Area Testing (RAT Run) program to ensure that they are up to the job.
By specifying a CRUISEMASTER® independent suspension system you can have peace of mind that your vehicle is under control with SHOCKMASTER® superior damping systems.