Choosing the right suspension system for your caravan and camper trailer will ensure optimum comfort for passengers in terms of ride (the ability to smooth out a bumpy road) and handling (the ability to safely accelerate, brake and corner).

Cruisemaster® Air Suspensions: the ultimate load protection and leveling capacity for offroad caravans and trailers

Cruisemaster® CRS Suspensions: ideal for modern caravans and camper trailers travelling on uneven country roads

Cruisemaster® Coil Suspensions: ideally suited to camper trailers and caravans where extra load protection is desired.

Ridemaster® Leaf Suspensions: traditional leaf springs which have been around for decades, and are simple, economical and reliable.

  • CRUISEMASTER® XT Coil Suspension - 1200 KG ATM

    • $2,158.67
    CRUISEMASTER® XT Coil Suspension - 1200 KG ATM
    CRUISEMASTER® XT Coil Suspension - 1200 KG ATMCRUISEMASTER® XT Coil Suspension - 1200 KG ATMCRUISEMASTER® XT Coil Suspension - 1200 KG ATMCRUISEMASTER® XT Coil Suspension - 1200 KG ATM
    CRUISEMASTER® XT Coil Suspension - 1200 KG ATMCRUISEMASTER® XT Coil Suspension - 1200 KG ATM

    Convert your camper or caravan into a true off-roader with CRUISEMASTER® Coil suspension system, the modern day answer for economical load protection and towability. Softer spring rates help protect both the caravan and its contents. Featuring a dual rate system incorporating internal polyurethane bump stops that provide a much higher secondary rate of suspension before the coil spring becomes coil bound. Ideal for harsh conditions, particularly outback roads.


    • This kit is only compatible with wheels that have a 125mm backspace
    • Please allow a minimum of 21 days turnaround for delivery as all kits are made to order
    • Internet special price only

    A CRUISEMASTER® Coil suspension kit has everything you need to convert your camper or caravan into a off - roader. These Pre-made suspension kits are supplied with weld-on suspension mounts which have adjustable camber & adjustable toe-in, independent suspension arms, King coil springs, Dexter electric brakes and Gabriel shock absorbers. The kit is supplied in pieces on pallet along with a installation diagram. A competent Fabricator could install one of these kits in approx. 1 - 2 days.

    Each year, Vehicle Components vigorously remote area test these suspension kits with highly sophisticated Motec Data logging technology such as temperature sensors, g-force sensors, height sensors & comprehensive GPS tracking software, This data is then thoroughly analysed to see if the suspension system can be improved in any areas, while also ensuring that the suspension systems are able to handle the roughest conditions and outperform the competition.

    Proudly designed, manufactured and tested in Australia by Vehicle Components. 

    CRUISEMASTER KIT: 1.2T 1.6T 2.0T
    LOAD RATING (ATM): 1200kg 1600kg 2000kg
    BEARINGS: Slim Line (Ford) SLM (Parallel) VT (rated @ 2.6T)
    STUD PATTERN: LC6 stud - 139.7mm PCD LC6 stud - 139.7mm PCD LC6 stud - 139.7mm PCD
    CHASSIS TO FACE: 175mm 175mm 175mm
    CHASSIS TO AXLE CENTRE: 155mm (approx. at rated load) 155mm (approx. at rated load) 157mm (approx. at rated load)
    AXLE TYPE: drop axle drop axle drop axle
    MAINTENANCE: adjustable toe-in & camber adjustable toe-in & camber adjustable toe-in & camber


    If the suspension specifications do not meet your needs, please fill in the Cruisemaster Suspension Order Form for a customised quote 

    Order Form - Cruisemaster XT Order Form - Cruisemaster XT (1277 KB)

    Cruisemaster Coil - Operation & Maintenance (PDF, 476KB)

    "I have had a couple of different trailing arm suspensions over the years, and also a suspension on a bigger off-road caravan, but don’t know what it is about your just feels so smooth, and when the going gets tough, it rides everything without stress and really looks after what’s on top." - Clint

    "The real reason for my email is to give feedback about the guys from your Servicing Department. What a pleasure it was to deal with them last Wednesday & you should be proud & thankfull to have such valuable & dedicated people working for your organisation. Servicing of the brakes was long overdue so it turned out to be a more complex job than a standard brake/bearing service. At all times Kieren & Kelvin clearly explained what was required to fix the faults & bring our rig back to good working order. The young fellow whose name I have forgotten was also very pleasant & helpful. When looking for a service providor who sells &/or uses quality materials & who employs people I feel confident in, whom I can trust & who have the skills & knowledge to do an excellent job. My impression is that Vehicle Components is one such organisation & again I would like to thank Kieren, Kelvin & the younger guy (sorry I forgot your name) for their professional attitude & excellent service delivery" - Greg & Diane

    "We would like to thank Vehicle Components for their excellent service and building such a great product. (Cruisemaster)" - Barry and Paulette Attwood

    "We have now completed 30,000 kms over conditions ranging from normal highway driving to outback roads and tracks. The suspension (Cruisemaster) has performed faultlessly under all conditions and is a pleasure to tow." - Peter and Anita Cooper

    "The stability and confidence attributed to the suspension (Cruisemaster) when driving really has to be experienced." - Ron Lett